Other

Yobi Green This is a bright yellow-green coating with a smooth, high-gloss finish. Matched to the light green color seen on RYOBI tools. Features: Single stage coating (UV stable)Oil and fuel resistantExcellent interior/exterior durabilitySmooth, high-gloss finish (90%+)Recommended Bake: 10 Minutes @ 400°F Metal Temperature *Columbia Coatings is not affiliated with RYOBI tools

Snap-On Red This is a vibrant, mid-high gloss red coating with a silky-smooth finish. Matched to Snap-on's red toolbox color. Features Good chemical resistanceGood exterior durabilityMid-high gloss (65-75% gloss)Humidity Resistance: 1000 hours pass (ASTM D-1735)Salt Spray: 1000 hours pass (ASTM B-117)Recommended Bake: 10 Minutes @ 375°F Metal Temperature*Columbia Coatings is not affiliated with Snap-on ...

Snap-On SM (Silver Metallic) This is a smooth, high gloss silver/grey coating with fine silver metallic pearls. Matched to Snap-on's silver toolbox color. For increased UV durability, a clear topcoat is recommended for outdoor use. Features Good chemical resistanceGood exterior durabilityGreat mar resistanceHigh gloss (80-85% gloss)Contains silver metallic flakesHumidity Resistance: 1000 hours pass (ASTM D-1735)Salt Spray: 1000 hours pass (ASTM B-117)Recommended Bake: 10 Minutes...

Non-Skid Black Hard, texturized, black coating that cures to a slip resistant, rough grit surface. Aids in the reduction of slip and fall accidents. Not like other powders, as it cures to a slip type coating with no sharp edges to give your parts that professional look. For use in areas where water may accumulate: steps, ladders, railings, and industrial plant equipment. Designed to improve traction on metal surfaces. Features: Single stage coating (UV stable)Superior slip resistant...

ANSI 49 GrayA match to the industry standard ANSI 49 Gray

Anodized AluminumAn excellent anodized aluminum look for most applications.  This powder matches anodized silver to a tee!Features: Add Matte Clear for an extra layer of protection.Oil & fuel resistant.

ANSI 61 GrayA match to the industry standard ANSI 61 Gray

CAST IRON TGIC Cast Iron look that gives an antique finish. Features Does Not Requires a Clear Topcoat Oil & Fuel Resistant Great For Both Interior and Exterior

Federal Standard 17925This is the Federal Standard #17925 in a gloss finish (80% gloss).Features: Single stage coating (UV stable)Oil and fuel resistantExcellent exterior durabilityHigh gloss finishSalt Spray: 1000 hours pass (ASTM B-117)Recommended Bake: 10 Minutes @ 400°F Metal Temperature

Federal Standard 26231 This is the Federal Standard #26231 in a gloss finish (80% gloss). Features: Single stage coating (UV stable)Oil and fuel resistantExcellent exterior durabilityHigh gloss finishSalt Spray: 1000 hours pass (ASTM B-117)Recommended Bake: 10 Minutes @ 400°F Metal Temperature

Post Office Blue TGICMatches post office Dark Blue with 80-90% Gloss.Excellent for both interior and exterior applications. Features Does Not Requires a Clear Topcoat Oil & Fuel Resistant Great For Both Interior and Exterior

Tuff Black – Scratch Resistant A high-gloss, ultra durable black coating with superior scratch resistance and outgas forgiving (OGF) properties. It does not require a clear topcoat and is excellent for both interior and exterior conditions. It has a smooth finish that is bested by our Super Mirror Black and Super Durable Wet Black, but it makes up for it with its scratch resistance. Features: Scratch resistantCures at low temperatures (as low as 300°F) Outgas forgiving properties Single stage...