Powders

A standard black with a little more sheen than our Satin Black. A good go-to black at a great price! 60-70% gloss level. Black Luster is excellent for both interior and exterior conditions. Does Not Require a Clear TopcoatOil & Fuel ResistantGreat for Both Interior & Exterior Conditions

Black Mini Texture A very low gloss, black mini texture coating with high hiding characteristics. A popular coating for handle rails, bumper guards, and running boards. Features: Single stage coating (UV stable)Great for both interior and exterior conditionsOil and fuel resistantFine texture finish (mini texture)Low gloss (4-7% gloss)Salt Spray: 1000 hours pass (ASTM B-117)Recommended Bake: 10 Minutes @ 400°F Metal Temperature Get a 44lb box for FREE when you spend at least $5000. All you have...

Black Peel A glossy black powder with an "orange peel" texture. Good hiding characteristics with a 70-80% gloss level. Features Does not require a clear topcoatOil & fuel resistantHigh-gloss, peel texture finish

Black River TGIC80% Gloss peel effect coating. High hiding characteristics.

A gloss black coating with tons of metallic flakes that explode in the sunlight!

Black Wrinkle Polyester Mid gloss wrinkle texture coating. High hiding characteristics.

Blasted Nickel Mini texture coating with metallic characteristics.

A fine luminous blue pearl pigment with a smooth pearlescent sheen. Pictured over a black basecoat. Use .25 - 3% Ratio of KP Pigment to Clear.

Blue Flake Clear TGIC This high-gloss clear coating features blue flakes and can be used over just about any base coat. Features Used as a topcoat over any base coat. Oil & Fuel Resistant Great For Both Interior and Exterior

Blue Hammertone TGIC A gloss hammered effect with high hiding characteristics.

Blue Ice Aftershock This is a light blue coating with a vein-like texture underneath. Application Instructions: Partial Cure: 15 min. total time in oven preheated to 400�F. Then apply our Super Mirror Clear and fully cure. * This powder requires a clear coat for the Illusion Effect. ** This coating can be used without a clear coat, but it will not be UV stable. Also, without a clear coat, this powder should only be cleaned with soap and water. Petroleum or solvent-based cleaners will...

A fine interference pigment with a very slight off-white down flop and a vibrant chromatic blue highlight. Pictured over a black and white basecoat. Use .25 - 3% Ratio of KP Pigment to Clear.