Products

This is a replacement lid for the new Vortex Cup. This is not compatible with older designs.

This is a replacement o-ring for the new Vortex Cup. This is not compatible with older designs.

This is a replacement barb for the new V3 Vortex Cup. This is not compatible with older designs.

This is a replacement base/lid for the new V3 Vortex Cup. The base and lid are interchangeable on the V3 vortex. This is not compatible with older designs.

This is a replacement Bullet Stem for the new V3 Vortex Cup. This is not compatible with older designs. Bullet Stem Features: Great for spraying powder with a smaller setup.Give consistent powder flow at just about any angle.Recommended use with Standard and Texture powders.Great for both beginner and professional powder coaters.

This is a replacement cylinder for the new V3 Vortex Cup. This is not compatible with older designs.DO NOT use chemicals or any solvent based material to clean your Vortex Cup Cylinder. For deep cleaning use soap and water only.

This is a replacement gasket for the new V3 Vortex Cup. This is not compatible with older designs.

This is a replacement input fitting for the new V3 Vortex Cup. This is not compatible with older designs.

This is a replacement vortex stem for the new V3 Vortex Cup. This is not compatible with older designs.Stem Features:Mimics fluidization hoppers to give a soft, even powder flow.Required more air pressure to operate (25-30 psi).Recommended use with Metallic, Flake, and Top Coat powders.Less likely to cause build up such as orange peel.

Choose from Galvanized, Cold Rolled or Brushed Stainless Steel.This product is cut from your choice of steel and ready to be coated and customized.*Steel should be cleaned before coated**Some prep work such as sanding, de-burring, or removing small cutouts (i.e. letters) may be requiredNot seeing the size you need? Call 931-388-7730 to order a custom size. ...

A distinctly unique and chromatic Optically Variable (ColorShift/Color Changing) pearlescent pigment that travels between Green, Blue, Purple and Orange and finishes to a fine pearl sheen. Pictured over a black base coat. Use .25 - 3% Ratio of KP Pigment to Clear.

Vaseline Style Grease