Products

High Heat Base Coat Black High temperature capable (1300�F. +) Water based coating, no VOCs. Use under any Techline exhaust system coating to increase the protection that the top coating can withstand. HHBK can withstand extreme temperatures of 2000F plus. It is a water based coating with no V.O.C.s. Use under any Tech Line coating to increase the temperature that the top coating can withstand. Use on pipes O.D. under all coatings. This coating must be oven cured, and cures at 500�F....

High Heat Base Coat Blue Exhaust Coating Cures at 500F. Water-Based and does not require etching after curing. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ...

MCS INSULATING COATING MCS is a ceramic reinforced coating capable of providing extremely high levels of insulation and chemical protection in very thin films. Designed to be used as a base coat for CermaKrome (MCX) and other Tech Line coatings. It is to be used either as a base coat on the outside diameter or as a standalone coating on the inside diameter. MCS as a base coat allows CermaKrome to be used in applications where normal metallic ceramic coatings will not maintain adhesion. In...

TURBO X� Turbo X is a silicone ceramic coating designed to be applied primarily to exhaust components. When applied to exhaust systems, Turbo X will remain color stable at exhaust gas temperatures up to 2000�F. Due to its unique ceramic nature, the coating also functions as a very effective thermal barrier, with reduced thermal radiation characteristics. The coating cures to a very hard, durable surface with excellent adhesion. Turbo X is designed to be cured in an industrial oven. Corrosion...

TURBO X� Turbo X is a silicone ceramic coating designed to be applied primarily to exhaust components. When applied to exhaust systems, Turbo X will remain color stable at exhaust gas temperatures up to 2000�F. Due to its unique ceramic nature, the coating also functions as a very effective thermal barrier, with reduced thermal radiation characteristics. The coating cures to a very hard, durable surface with excellent adhesion. Turbo X is designed to be cured in an industrial oven. Corrosion...

Extension, Flat Spray, 150mm (Part# 910028485)

EZ Powder StripEZ Powder Strip is specially designed to remove powder coating from ferrous and non-ferrous metals at room temperatures without the dangers of harmful acids. This product is readily biodegradable.  Details: Liquid stripperThin, clear liquidBiodegradableEnvironmentally friendlyEasy Disposal  Click the image below to see it in action! ...

Federal Standard 17925This is the Federal Standard #17925 in a gloss finish (80% gloss).Features: Single stage coating (UV stable)Oil and fuel resistantExcellent exterior durabilityHigh gloss finishSalt Spray: 1000 hours pass (ASTM B-117)Recommended Bake: 10 Minutes @ 400°F Metal Temperature

Federal Standard 26231 This is the Federal Standard #26231 in a gloss finish (80% gloss). Features: Single stage coating (UV stable)Oil and fuel resistantExcellent exterior durabilityHigh gloss finishSalt Spray: 1000 hours pass (ASTM B-117)Recommended Bake: 10 Minutes @ 400°F Metal Temperature

Federal Standard Camo GreenThis is the Federal Standard Camo Green #34094 in a matte finish (0-10% gloss).

Federal Standard Desert TanThis is the Federal Standard Desert Tan #33446 in a matte finish (0-10% gloss).

A very fine Optically Variable (ColorShift/Color Changing) pearlescent pigment that shifts between Green, Yellow, Blue and Cyan and finishes to to an almost silk like pearl sheen. Pictured over a black base coat. Use .25 - 3% Ratio of KP Pigment to Clear.