CermaKrome Exhaust System Coatings

APPLICATION:

Ready to spray no thinning needed (may be thinned with distilled or deionized water) STIR AND SHAKE WELL BEFORE USE BEST TO MIX IN A BLENDER

1. ALL PARTS MUST BE ABSOLUTELY FREE OF ALL OILS, GREASE, MOISTURE, DUST, SCALE OR CORROSION. Clean metal using standard cleaning methods with Columbia Coatings Super Degreaser (SD-MTO25)  Sandblast parts (ONLY WHEN DRY) with 10X EpiX Blasting Media MP 70/100 Grit (EPIX), or 120 grit aluminum oxide.

2. Clean all parts using acetone, M.E.K., or similar material. DO NOT USE petroleum based solvents.

3. Apply coating in light fog passes to achieve a thickness of .001" to .0015". Minimum part temperature should be 65�F, if below warm up part. Spray all hard to reach areas first.

4. Inspect part for complete coverage. Part should be a light green color.

5. Immediately dry coating in an environment of from 100�F to 150�F. Part should change to a chalk white.

6. Bake part at a temperature of at least 500�F. for one (1) hour. Time starts when part reaches bake temperature.

7. If a second coat is desired, lightly blast at 25/30 psi, re-spray, dry and bake.

8. To polish either lightly blast with #12 glass bead, then polish with fine steel wool/polishing compound, or vibratory polish. Metallic Ceramic Coating. Polishes out To a Chrome-like Finish